SS304-20x20mm (3/4×3/4 Inch) L-Shape Patti Angle Profile Mirror 8 Feet Length

Stainless steel (SS) mirror angle profiles are high-reflectivity, corrosion-resistant L-shaped metal sections used for decorative edge protection, trim, and structural reinforcement. Usually made from Grade 202/304 or 316 stainless steel with an 8K mirror finish, they are commonly available in sizes from 12x12mm to 100x100mm and thicknesses of 0.8mm/1mm/1.2mm/1.5mm/2mm/2.5mm/3mm.

Key Aspects of SS Mirror Angle Profiles:

Appearance & Finish: The surface features a highly polished #8 mirror finish, achieved by polishing to a fine grit ((320–600)), creating a reflective, decorative surface.

Profile Shape: Typically an L-shaped profile, with equal or unequal legs, often with a precise 90-degree bend for structural, trim, or corner protection.

Material Grades: Primarily AISI 304 for general, high-end decorative, or interior applications due to its good corrosion resistance. Grade 316 is used for superior corrosion resistance in marine or, industrial environments.

Dimensions & Thickness: Available in standard lengths (e.g., 8–10 ft or 2000–3000 mm). Thicknesses range from thin 0.8mm to 10mm for decorative trim and up to 3/10mmfor heavier-duty structural applications.

Common Uses: Ideal for corner protection (wall corners, furniture, machinery), edge trimming, tile trim, architectural finishing, and decorative metalwork.

Installation: Generally installed using high-strength adhesive, silicone, or double-sided tape.

Variations: Sometimes PVD titanium coated for colors such as gold, rose gold, black, or bronze.